Standard finder

Status: In force / 2023-03-22

Procedure for the regulatory inspection. Pressure equipment. Part 0: General requirements

Status: In force / 2023-03-22

Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for doors, shutters, operable fabric curtains and openable windows

Status: In force / 2023-03-22

Gas Infrastructure - Compressor stations - Functional requirements

Status: In force / 2023-03-22

Installation of post-tensioning kits for prestressing of structures - Part 1: Competence of personnel

Status: In force / 2023-03-22

Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service

Status: In force / 2023-03-22

Luminaires - Part 1: General requirements and tests

Status: In force / 2023-03-22

Railway applications - Rolling stock - Electronic equipment

Status: In force / 2023-03-22

Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to the source for determining exposure to sound (ISO 17201-6:2021)

Status: In force / 2023-03-22

Luminaire performance - Part 1: General requirements

Status: In force / 2023-03-22

Natural gas - Determination of water by the Karl Fischer method - Part 1: General requirements (ISO 10101-1:2022)

Status: In force / 2023-03-22

Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks

Status: In force / 2023-03-22

Fasteners - Hexagon head bolts - Product grades A and B (ISO 4014:2022)

Status: In force / 2023-03-22

Fasteners - Hexagon head screws - Product grade C (ISO 4018:2022)

Status: In force / 2023-03-22

General principles for manufacturing, filling and holding e-liquids for prefilled containers or products

Status: In force / 2023-03-22

Fasteners - Hexagon head bolts with reduced shank (shank diameter ˜ pitch diameter) - Product grade B (ISO 4015:2022)

Status: In force / 2023-03-22

Fasteners - Electroplated coating systems (ISO 4042:2022)

Status: In force / 2023-03-22

Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022)

Status: In force / 2023-03-22

Natural gas - Determination of water by the Karl Fischer method - Part 2: Volumetric procedure (ISO 10101-2:2022)

Status: In force / 2023-03-22

Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 4: Information exchange (ISO 19650-4:2022)

Status: In force / 2023-03-22

Fasteners - Hexagon head bolts - Product grade C (ISO 4016:2022)

Status: In force / 2023-03-22

Conformity assessment — Code of good practice

Status: In force / 2023-03-22

Plastics. Reusable plastic tableware for food use. Definition and test method

Status: Activate / 2022-10-01

Standard Specification for Rubber-Coated Cloth Hospital Sheeting

Status: In force / 2023-03-22

Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

Status: Reaffirmed / 2023-03-14

Road Load Tire Model Validation Procedures for Dynamic Behavior

Status: Reaffirmed / 2023-03-14

Design & Run-Time Information Exchange for Health-Ready Components

Status: Revised / 2023-03-08

Heat Treatment of Aluminum Alloy Raw Materials

Status: Revised / 2023-03-08

Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged

Status: Revised / 2023-03-08

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3 μm) (T1P)

Status: Revised / 2023-03-08

Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50)

Status: Revised / 2023-03-08

Aircraft Tire Inspection - In-Service Removal Criteria

Status: Stabilized / 2023-03-08

Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications

Status: Revised / 2023-03-08

BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRACTION, INCH

Status: Stabilized / 2023-03-08

A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms

Status: Stabilized / 2023-03-08

H-III5F Chest Jacket Harmonization

Status: Stabilized / 2023-03-08

Hybrid III Large Male Drawing Package

Status: Revised / 2023-03-08

Engine Oil Tests

Status: Revised / 2023-03-08

Listing of Provider Service Identifiers and Associated Application Technical Reports

Status: PUBLISHED / 2014-11-18

Industrial automation systems and integration — Product data representation and exchange — Part 1002: Application module: Colour

Status: PUBLISHED / 2014-11-18

Industrial automation systems and integration — Product data representation and exchange — Part 1376: Application module: Cfd equations

Status: PUBLISHED / 2011-10-15

Industrial automation systems and integration — Product data representation and exchange — Part 1283: Application module: Resource as realized characterized

Status: PUBLISHED / 2000-11-09

Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C

Status: PUBLISHED / 2000-03-16

Metallic coatings — Test methods for electrodeposited gold and gold alloy coatings — Part 2: Mixed flowing gas (MFG) environmental tests

Status: PUBLISHED / 1998-04-02

Building construction machinery and equipment — Terms and definitions

Status: PUBLISHED / 1998-02-26

Raw sheep skins — Part 1: Descriptions of defects

Status: PUBLISHED / 1997-11-27

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)

Status: PUBLISHED / 1997-10-09

Measurement of liquid flow in open channels — Bed material sampling

Status: PUBLISHED / 1997-05-01

Laboratory glassware — Filter funnels

Status: PUBLISHED / 1997-05-01

Laboratory glassware — Straight-bore glass stopcocks for general purposes

Status: PUBLISHED / 1996-12-19

Information technology — Open Systems Interconnection — Systems Management: Attributes for representing relationships — Amendment 1: Implementation conformance statement proformas — Technical Corrigendum 1