Skip main navigation
You are at: Home>Standards>DIN
Bodies
Status
In force
Cancelled
Project
Dates
From
Up to
Languages
Standard finder

Standard finder

Results for:

Number of results 138.538

DIN
Withdrawn
2024-05

T-head bolts with large head / Note: Date of issue 2023-09-15

DIN
Withdrawn
2024-05

Knurled nuts / Note: Date of issue 2023-09-15

DIN
Withdrawn
2024-05

Drainage systems on private ground - Part 3: Specifications for service and maintenance / Note: Date of issue 2023-09-22

DIN
Withdrawn
2024-05

Central coolant supply for HSK - Coolant pipe with threaded nut for hollow taper shanks, type E according to DIN 69893-5 - Dimensions / Note: Date of issue 2023-09-15

DIN
Withdrawn
2024-05

Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals / Note: Date of issue 2023-09-08

DIN
Withdrawn
2024-05

Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E - Dimensions and design / Note: Date of issue 2023-09-22

DIN
Withdrawn
2024-05

Determination procedure for safety characteristics of explosion protection for hybrid mixtures of substances - Part 2: Vapours / Note: Date of issue 2023-09-01

DIN
Withdrawn
2024-05

Determination methods for safety-related parameters of explosion protection for hybrid mixtures of substances - Part 1: Gases / Note: Date of issue 2023-09-01

DIN
Withdrawn
2024-05

Coffee extracts - Determination of the dry matter content of coffee extracts - Sea sand method of liquid or pasty coffee extracts (ISO 22994:2021); Text in German and English / Note: Date of issue 2023-09-22

DIN
Withdrawn
2024-05

Oolong tea - Definition and basic requirements (ISO 20716:2022); Text in German and English / Note: Date of issue 2023-09-15

DIN
Withdrawn
2024-05

Fibreboards - Specifications - Part 4: Requirements for softboards; German version EN 622-4:2019

DIN
Withdrawn
2024-05

Hydrometer for density measurement of buttermilk serum / Note: Date of issue 2023-09-29

DIN
Withdrawn
2024-05

Elastic floorings for horses movement, rest and lying surfaces - Requirements and testing / Note: Date of issue 2023-10-20

DIN
Withdrawn
2024-05

Slotted pan head screws with small head / Note: Date of issue 2023-09-29

DIN
Withdrawn
2024-05

Lifting eye bolts / Note: Date of issue 2023-09-29

DIN
Withdrawn
2024-05

Round nuts with set pin holes in side / Note: Date of issue 2023-10-06

DIN
Withdrawn
2024-05

Lifting eye nuts / Note: Date of issue 2023-09-29

DIN
Withdrawn
2024-05

Round nuts with drilled holes in one face / Note: Date of issue 2023-10-06

DIN
Withdrawn
2024-05

Slotted round nuts / Note: Date of issue 2023-10-06

DIN
Activate
2024-02

Technical product specification (TPS) - Application guidance - Structured and commented overview of ISO and DIN Standards for technical product documentation (TPD) and geometrical product specification (GPS)

DIN
Activate
2024-02

Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English

DIN
Activate
2024-02

Areas for the fire brigade on premises / Note: Applies in conjunction with DIN 14701-1 (2018-01), DIN EN 1777 (2010-06), DIN EN 14043 (2014-04), DIN EN 14044 (2014-04).

DIN
Activate
2024-02

Blank flanges with stainless steel facing, of nominal sizes DN 125 to DN 500 and PN designations PN 10 to PN 40

DIN
Activate
2024-02

Geotextiles and geotextile related products - Part 4: Determination of permeability normal to the plane under load at constant hydraulic water head

DIN
Activate
2024-02

Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English

DIN
Activate
2024-02

Thermal analysis (TA) - Thermogravimetry (TG) - Principles

DIN
Activate
2024-02

Ground plans for components for buildings for fire brigade use

DIN
Activate
2024-02

Electrical properties of fresh and used oils from electric drives in vehicles - Measurement of the specific electrical conductivity, the relative permittivity (<epsilon><(Index)r>) and the dielectric dissipation factor (tan <delta>)

DIN
Activate
2024-02

Flange joints for process vessels - Flat gaskets

DIN
Activate
2024-02

Ellipsometry - Part 6: Effective Materials model; Text in German and English

DIN
Activate
2024-02

Firefighting purposes - Chargers for float charge of starter batteries and auxiliary batteries for special uses - Requirements and testing

DIN
Activate
2024-02

Light adjustable base plates for scaffolds - Structural requirements, assessment of load-bearing capacity and manufacturing

DIN
Activate
2024-02

Lubricants - Consistency classification of lubricating greases - NLGI grades

DIN
Activate
2024-02

Palm grips

DIN
Activate
2024-02

Signs for civil defense

DIN
Activate
2024-02

Playgrounds and outdoor play areas - Part 2: Matrix for assessment of inclusive play areas

DIN
Activate
2024-02

Waterproofing of roofs, balconies and walkways - Part 3: Non-utilized and utilized roofs - Selection, execution and detailing / Note: Date of issue 2024-01-19*Applies in conjunction with DIN 18531-1 (2024-02), DIN 18531-2 (2024-02), DIN 18531-4 (2024-02).*Intended as replacement for DIN 18531-3 (2017-07).

DIN
Activate
2024-02

Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature / Note: Date of issue 2024-01-05*Intended as replacement for DIN 7080 (2005-05).

DIN
Activate
2024-02

Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry / Note: Date of issue 2024-01-05*Intended as replacement for DIN 5033-9 (2018-04).

DIN
Activate
2024-02

Criticality safety in processing and handling of fissile materials - Principles / Note: Date of issue 2024-01-05*Intended as replacement for DIN 25403-1 (2013-12).

DIN
Activate
2024-02

Information and documentation - Romanization of the Syriac Alphabet / Note: Date of issue 2024-01-19

DIN
Activate
2024-02

Metallic coatings - Electroplated chromate coatings with chromium(III)-based electrolytes on copper-nickel coatings on plastics / Note: Date of issue 2024-01-19

DIN
Activate
2024-02

Waterproofing of concrete areas trafficable by vehicles - Part 2: Waterproofing with composite sheeting comprising a single welded polymerized bitumen sheet and a mastic asphalt waterproofing layer / Note: Date of issue 2024-01-19*Applies in conjunction with DIN 18532-1 (2024-02).*Intended as replacement for DIN 18532-2 (2017-07).

DIN
Activate
2024-02

Waterproofing of concrete areas trafficable by vehicles - Part 3: Waterproofing comprising two layers of polymerized bitumen sheeting / Note: Date of issue 2024-01-19*Applies in conjunction with DIN 18532-1 (2024-02).*Intended as replacement for DIN 18532-3 (2017-07), DIN 18532-3/A1 (2018-09), DIN 18532-3/A2 (2021-02).

DIN
Activate
2024-02

Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread / Note: Date of issue 2024-01-12*Intended as replacement for DIN 3900 (2001-06).

DIN
Activate
2024-02

Non soldering compression fittings with cutting ring - Run T-stud with taper threaded stud end (not for new design) / Note: Date of issue 2024-01-12*Intended as replacement for DIN 3913 (2001-04).

DIN
Activate
2024-02

Waterproofing of roofs, balconies and walkways - Part 1: Non-utilized and utilized roofs - Requirements and principles for execution and design / Note: Date of issue 2024-01-19*Applies in conjunction with DIN 18531-2 (2024-02), DIN 18531-3 (2024-02), DIN 18531-4 (2024-02).*Intended as replacement for DIN 18531-1 (2017-07).

DIN
Activate
2024-02

Waterproofing of concrete areas trafficable by vehicles - Part 4: Waterproofing comprising a single layer of synthetic or elastomer sheeting / Note: Date of issue 2024-01-19*Applies in conjunction with DIN 18532-1 (2024-02).*Intended as replacement for DIN 18532-4 (2017-07).

DIN
Activate
2024-02

Portable foam liquid container; Amendment A1 / Note: Date of issue 2024-01-12*Intended as an amendment to DIN 14452 (2016-12).

DIN
Activate
2024-02

Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design) / Note: Date of issue 2024-01-12*Intended as replacement for DIN 3903 (2001-04).

Number of results 138.538

The top selling

Standards
Books