Skip main navigation
You are at: Home>Standards>IEC
Status
Language
Standard finder

Standard finder

Results for:

Number of results 22.721

Status: VIGENTE / 2023-05-26

Audio/video, information and communication technology equipment - Part 1: Safety requirements

Status: VIGENTE / 2023-05-26

Audio/video, information and communication technology equipment - Part 1: Safety requirements

Status: VIGENTE / 2023-05-24

Insulation co-ordination - Part 2: Application guidelines

Status: VIGENTE / 2023-05-24

Insulation co-ordination - Part 2: Application guidelines

Status: VIGENTE / 2023-05-23

Industrial-process control valves - Part 1: Control valve terminology and general considerations

Status: VIGENTE / 2023-05-23

Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing with push-pull locking

Status: VIGENTE / 2023-05-23

Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods

Status: VIGENTE / 2023-05-23

Connectors for electrical and electronic equipment - Part 7: Detail specification for up to 7 ways including PE or FE (data/power) and shield pin, free and fixed circular connectors for balanced single-pair data transmission with current-carrying capacity - Mechanical mating information, pin assignment and additional requirements for type 7

Status: VIGENTE / 2023-05-23

Industrial-process control valves - Part 1: Control valve terminology and general considerations

Status: VIGENTE / 2023-05-23

Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment

Status: VIGENTE / 2023-05-22

Optical fibre cables - Part 1-1: Generic specification - General

Status: VIGENTE / 2023-05-22

Optical fibre cables - Part 1-1: Generic specification - General

Status: VIGENTE / 2023-05-15

Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSCs)

Status: VIGENTE / 2023-05-12

Connectors for electrical and electronic equipment - Product requirements - Part 8-107: Power connectors - Detail specification for 2P 200 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated

Status: VIGENTE / 2023-05-12

Connectors for electrical and electronic equipment - Product requirements - Part 8-109: Power connectors - Detail specification for 2P 130 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated

Status: VIGENTE / 2023-05-11

Nuclear facilities - Instrumentation and control, and electrical power systems - Artificial Intelligence applications

Status: VIGENTE / 2023-05-11

Materials for printed boards and other interconnecting structures - Part 2-51: Reinforced base materials, clad and unclad - Base materials for integrated circuit card carrier tape, unclad

Status: VIGENTE / 2023-05-11

Electrical installations for lighting and beaconing of aerodromes - Part 3-4: Safety secondary circuits in series circuits - General safety requirements

Status: VIGENTE / 2023-05-11

Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 1: Enhanced macro bend loss multimode 50 µm core diameter fibres - General and guidance

Status: VIGENTE / 2023-05-09

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation

Status: VIGENTE / 2023-05-09

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-12: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 12

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-14: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 14

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-20: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 20

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-17: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 17

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-13: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 13

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-16: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 16

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-15: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 15

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-21: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 21

Status: VIGENTE / 2023-05-05

Industrial networks - Profiles - Part 2-11: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 11

Status: VIGENTE / 2023-05-05

Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators

Status: VIGENTE / 2023-05-04

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler

Status: VIGENTE / 2023-05-04

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

Status: VIGENTE / 2023-05-04

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

Status: VIGENTE / 2023-05-03

Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities

Status: VIGENTE / 2023-05-03

Connectors for electrical and electronic equipment - Product requirements - Part 8-103: Power connectors – Detail specification for 2P+PE circular connectors with 20 A rated current and push-pull locking IP65/IP67 with metal housing

Status: VIGENTE / 2023-05-03

Connectors for electrical and electronic equipment - Product requirements - Part 8-108: Power connectors - Detail specification for 2P 250 A, 1 000 V plus 2P 5 A 50 V rectangular housing shielded connectors with IP65/IP68 degree of protection when mated and locked, and IPXXB when unmated

Status: VIGENTE / 2023-05-03

Connectors for electrical and electronic equipment - Product requirements - Part 8-104: Power connectors - Detail specification for 2-pole circular connectors with 40 A rated current and push-pull locking IP65/IP67 with metal housing

Status: VIGENTE / 2023-04-19

Field device integration (FDI)® - Part 150-1: Profiles - ISA100

Status: VIGENTE / 2023-04-19

Field device integration (FDI)® - Part 150-1: Profiles - ISA100

Status: VIGENTE / 2023-04-18

Optical fibre cables - Part 1-309: Generic specification - Basic optical cable test procedures - Cable element test methods - Bleeding and evaporation of filling or flooding compounds, Method G9

Status: VIGENTE / 2023-04-14

Digital addressable lighting interface - Part 253: Particular requirements - Diagnostics and maintenance (device type 52)

Status: VIGENTE / 2023-04-12

Digital addressable lighting interface - Part 252: Particular requirements - Energy reporting (device type 51)

Status: VIGENTE / 2023-04-12

Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector

Status: VIGENTE / 2023-04-12

Digital addressable lighting interface - Part 250: Particular requirements - Integrated power supply (device type 49)

Status: VIGENTE / 2023-04-05

Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test procedures - Ribbon dimensions - Aperture gauge, method G3

Status: VIGENTE / 2023-04-05

Optical fibre cables - Part 1-301: Generic specification - Basic optical cable test procedures - Cable elements test methods - Bend test, method G1

Status: VIGENTE / 2023-04-04

Calibration of fibre optic chromatic dispersion test sets

Status: VIGENTE / 2023-03-31

Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies

Status: VIGENTE / 2023-03-31

Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables for use in terminated breakout cable assemblies

Number of results 22721

The top selling

Standards
Books