Standard finder

Status: Revised / 2023-05-25

CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COAXIAL, TWINAXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES AND END CAPS

Status: Revised / 2023-05-25

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 AND AS95234 CONNECTORS)

Status: Revised / 2023-05-24

Brazing, Silver, for Small Pressurized Fittings

Status: Revised / 2023-05-24

J1979-DA, Digital Annex of E/E Diagnostic Test Modes

Status: Reaffirmed / 2023-05-24

Air Dryer Installation Procedure

Status: Reaffirmed / 2023-05-24

Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)

Status: Reaffirmed / 2023-05-24

Broadband PLC Communication for Plug-in Electric Vehicles

Status: Revised / 2023-05-23

CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COXIAL, TWIN AXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS

Status: Stabilized / 2023-05-22

Cleaner for Aircraft Exterior Metallic Surfaces Wipe Solvent, Cold Operations

Status: Stabilized / 2023-05-22

Cleaner, Fuel Drop Tank Water Soluble

Status: Revised / 2023-05-22

Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure

Status: Revised / 2023-05-22

Sealing Compound Aircraft Firewall, Silicone

Status: Revised / 2023-05-22

Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional

Status: Revised / 2023-05-22

Steel, Corrosion- and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated

Status: Revised / 2023-05-22

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated

Status: Revised / 2023-05-22

Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Forging Stock, 17Cr - 0.50Mo (0.95 - 1.20C) (440F), Free-Machining, Annealed

Status: Revised / 2023-05-22

Steel, Corrosion- and Heat-Resistant, Welding Wire 18.5Cr - 11Ni - 0.40Cb (Nb) (SAE 30347)

Status: Revised / 2023-05-22

Steel, Bars, Forgings, and Forging Stock, Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615)

Status: Stabilized / 2023-05-22

Guns, Spray, Oil and Solvent

Status: Stabilized / 2023-05-22

Heat Transfer Fluid, Fluorochemical

Status: Stabilized / 2023-05-22

HUBS, CONDUIT CONNECTION, STANDARD DIMENSIONS

Status: Stabilized / 2023-05-22

COUPLING INSTALLATIONS, STANDARD CONDUIT, ELECTRICAL

Status: Revised / 2023-05-22

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8

Status: Revised / 2023-05-22

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SRIES I, III, AND IV CONNECTORS)

Status: Revised / 2023-05-22

Interface Standard, Miniature Mission Store Interface

Status: Stabilized / 2023-05-22

Conduit, Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations

Status: Revised / 2023-05-22

Aircraft Ground Deicing/Anti-Icing Processes

Status: Revised / 2023-05-22

FITTING ASSEMBLY, CROSS, REDUCER AND NON-REDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE

Status: Revised / 2023-05-22

Improved Roadway Illumination: Information Resource

Status: Stabilized / 2023-05-22

User’s Manual for the Small Adult Female Hybrid III Test Dummy

Status: Revised / 2023-05-22

System Theoretic Process Analysis (STPA) Recommended Practices for Evaluations of Safety-Critical Systems in Any Industry

Status: Revised / 2023-05-22

Breath-Based Alcohol Detection System

Status: Stabilized / 2023-05-22

Anodized Aluminum Automotive Parts

Status: Stabilized / 2023-05-22

Methods of Measuring Case Depth

Status: Stabilized / 2023-05-22

Electroplating and Related Finishes

Status: Reaffirmed / 2023-05-19

Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Truck and Bus

Status: Reaffirmed / 2023-05-19

Test Procedures for the Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)

Status: Revised / 2023-05-17

Brazing, Silver for Use up to 400 °F (204 °C)

Status: Revised / 2023-05-17

Pressure Testing, Hydraulic Pressure as Specified

Status: Revised / 2023-05-17

Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated

Status: Stabilized / 2023-05-17

Passenger Reading Lights

Status: Stabilized / 2023-05-17

Cabin Crew Rest Facilities

Status: Revised / 2023-05-10

Air Bleed Objective for Rotorcraft Turbine Engines

Status: Revised / 2023-05-10

Tolerances Copper and Copper Alloy Sheet, Strip, and Plate

Status: Revised / 2023-05-10

Magnetic Particles, Nonfluorescent Dry Method

Status: Revised / 2023-05-10

Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged

Status: Revised / 2023-05-10

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-O) Annealed

Status: Revised / 2023-05-10

Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged

Status: Revised / 2023-05-10

Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated

Status: Revised / 2023-05-10

Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)