This European Standard specifies requirements for roof lights made of plastic materials (e.g. GF-UP, PC, PMMA, PVC) with and without upstands made of e.g. GF-UP, PVC, steel, aluminium or wood for installation in roofs. These roof lights serve the purpose of lighting by means of daylight and of ventilating interior spaces by means of opening devices.
This European Standard applies to roof lights with a rectangular or circular ground plan (see Figures 1 and 2), with an opening span (width) or diameter not larger than 2,5 m and an opening length not larger than 3,0 m in roof pitches up to 25°. This document does not cover roof lights which contribute to the load-bearing or stiffness of the roof itself.
This European Standard applies to roof lights without upstand and to roof lights, where a single manufacturer provides all components of the roof light with upstand, which are bought in a single purchase.
The possible additional functions of smoke and heat ventilation in case of fire, and/or roof access, are outside the scope of this European Standard.
This European Standard does not include calculation with regard to construction, design requirements and installation techniques.
NOTE Guidelines for safety, application, use and maintenance of individual roof lights are presented in Annex A.
La présente Norme européenne spécifie les exigences pour les lanterneaux en matière plastique (par exemple polyester renforcé par des fibres de verre (PRV), polycarbonate (PC), polyméthacrylate de méthyle (PMMA), polychlorure de vinyle (PVC) avec et sans costières, fabriqués par exemple en PRV, PVC, acier, aluminium ou bois, et destinés à être installés sur des toitures. Ces lanterneaux assurent l’éclairement zénithal naturel et la ventilation des espaces intérieurs au moyen de dispositifs d’ouverture.
La présente Norme européenne s’applique aux lanterneaux ayant une embase rectangulaire ou circulaire (voir Figures 1 et 2), la portée (largeur) ou le diamètre de l’ouverture ne dépassant pas 2,5 m et la longueur de l’ouverture n’étant pas supérieure à 3,0 m sur les toitures en pente jusqu’à 25°. Le présent document ne couvre pas les lanterneaux qui contribuent à la portance ou à la raideur de la toiture proprement dite.
La présente Norme européenne s'applique aux lanterneaux sans costière et aux lanterneaux avec costière, dont tous les éléments constitutifs faisant partie intégrante d'un achat unique sont fournis par un seul fabricant.
Les éventuelles fonctions additionnelles d’évacuation des fumées et de la chaleur en cas d’incendie et/ou les trappes d’accès à la toiture ne relèvent pas du domaine d’application de la présente Norme européenne .
La présente Norme européenne ne comprend pas les calculs concernant les constructions, les exigences de conception et les méthodes d'installation.
NOTE Les directives relatives à la sécurité, à l'application, à l'utilisation et à l'entretien des lanterneaux ponctuels sont présentées à l'Annexe A.
Diese Europäische Norm legt Anforderungen an Lichtkuppeln aus Kunststoffmaterialien (z. B. GF-UP, PC,
PMMA, PVC) — mit und ohne Aufsetzkränze(n) aus z. B. GF-UP, PVC, Stahl, Aluminium oder Holz — zum
Einbau in Dächern fest. Diese Lichtkuppeln dienen zur Ausleuchtung mit Tageslicht und zum Lüften von
Räumen mittels Öffnungselementen.
Diese Europäische Norm gilt für Lichtkuppeln mit rechteckigem oder rundem Grundriss (siehe Bilder 1 und 2),
mit einer Öffnungsweite (Breite) oder einem Durchmesser von höchstens 2,5 m und einer Öffnungslänge von
höchstens 3,0 m in Dachflächen mit Neigungen bis 25°. Dieses Dokument gilt nicht für Lichtkuppeln, die zur
Tragfähigkeit oder zur Steifigkeit des Daches selbst beitragen.
Diese Europäische Norm gilt für Lichtkuppeln ohne Aufsetzkränze und für solche Lichtkuppeln, bei denen ein
einzelner Hersteller sämtliche Bauteile einer Lichtkuppel mit Aufsetzkranz bereitstellt, und die in einem
einzelnen Kauf erworben werden.
Mögliche zusätzliche Funktionen als Rauch- und Wärmeabzug im Brandfall und/oder als Dachausstieg liegen
außerhalb des Anwendungsbereichs dieser Europäischen Norm.
Berechnungen hinsichtlich Konstruktion, Auslegungsanforderungen und Einbauverfahren sind in dieser
Europäischen Norm nicht enthalten.
ANMERKUNG Leitlinien im Hinblick auf Sicherheit, Einbau, Anwendung und Wartung von Lichtkuppeln sind im
Anhang A aufgeführt.